Clean, filtered water at every tap in your home. We supply and install whole house filtration systems across Auckland — from sediment filters to multi-stage systems.
Call Now — We'll Sort It 0800 322 322A whole house filtration system is installed at the point of entry — where your water supply enters the property. That means every tap, shower, washing machine, and appliance in your home gets filtered water. Not just the kitchen sink.
Auckland's municipal water is treated and generally safe, but it still contains chlorine, sediment, and trace contaminants. A whole house system removes these before the water reaches any part of your home. The result is better tasting water, less scale build-up in your hot water cylinder, and cleaner water for showering and laundry.
The system goes inline on your main water supply, usually near your toby (water meter) or where the supply enters the house. Water passes through one or more filter stages before it reaches your internal plumbing.
A single sediment or carbon filter. Good for basic chlorine and sediment removal. Low maintenance — just swap the filter cartridge every 6-12 months.
A sediment pre-filter followed by a carbon block filter. The sediment filter catches particles first, protecting the carbon filter and extending its life. This is the most common setup we install.
For tank water or bore water properties, we can add UV sterilisation and additional filtration stages to handle bacteria, iron, and other contaminants specific to untreated water sources.
We supply and install systems from trusted brands that are well-supported in New Zealand:
We'll recommend the right system based on your water source, household size, and what you want to filter out.
Whole house filters need regular cartridge replacement to keep working properly:
We offer a scheduled replacement service — we'll come out, swap the filters, and check the system is running right. No need to remember when it's due.
A properly sized system won't noticeably affect your pressure. We size the filter housing and cartridges to match your pipe size and flow rate. If your pressure is already low, we'll address that as part of the install.
It depends on the system type and installation complexity. A basic single-stage system is the most affordable option. Multi-stage or UV systems cost more. We'll give you a straight price including supply and installation.
A whole house system handles chlorine and sediment, which covers most people's concerns. If you want an extra level of filtration for drinking water specifically — like removing heavy metals or fluoride — an under-bench filter at the kitchen tap is a good add-on.
Absolutely. Tank water often needs more filtration than mains water — sediment, tannins, and bacteria can all be issues. We typically install a sediment pre-filter, carbon filter, and UV steriliser for tank water properties.
Most whole house filter installations take 2-3 hours. We'll need to shut off the water supply during install — usually about an hour. We'll let you know in advance so you can plan around it.
Want Cleaner Water? Call 0800 322 322 — we'll sort it.
Call Now